The description of this item has been automatically translated. The company HBS has the right vehicle parts and auto spare parts for every type of vehicle. We advise customers in detail and competently. The company carries a large range of high-quality products and accessories from well-known manufacturers, which are offered at low prices. This includes spare parts and wearing parts, such as car radios, steering wheels or control units and much more.
A wide range of exclusive spare parts is also available. Decisive plus points that speak for us: Competent, friendly and reliable employees and therefore fast and safe processing of orders, credits and complaints Individual treatment of each customer Focus on long-term and successful partnerships Large range of engine parts from all well-known manufacturers with international sales! Please compare the spare part numbers before purchasing. So that you get an accurate impression of the item's condition, we try to attach meaningful pictures to you. Please note that the quality of the spare parts depends on many factors.
Before the replacement part is dismantled, it is checked for functionality and checked again visually after dismantling. We always try to satisfy our customers. Information on the INTEC AG guarantee contract.The content of the guarantee contract results from the enclosed "guarantee certificate" and the "guarantee conditions" described below. With the conclusion of the guarantee contract you belong to the select group of satisfied and carefree vehicle owners. INTEC AG, Königsallee 243, 37079 Göttingen (hereinafter: INTEC) Has been commissioned by the guarantor with the technical processing of the guarantee on his behalf. Declarations of intent and notifications - including notifications of damage - must therefore be sent directly to INTEC. Commitments and rejections by INTEC are made on behalf of the guarantor. In the case of a guarantee, INTEC will handle the damage on behalf of the guarantor. Statutory rights of the guarantee holder are not restricted by this guarantee contract. Part A: What does the guarantee include?
(1) There is a guarantee for the unit named in the guarantee certificate. The guarantee case occurs if the unit loses its functionality immediately within the agreed guarantee period, ie not as a result of the influence of non-guaranteed parts or circumstances (damage). (2) The guarantee generally only applies to guarantee cases that occur within the Federal Republic of Germany.
If the vehicle in which the unit is installed is temporarily, ie for a period of max. Six consecutive weeks outside the Federal Republic of Germany, the guarantee for this period extends beyond that within the borders of geographic Europe. If damage occurs outside of the Federal Republic of Germany, but within the borders of geographical Europe and if the aforementioned period of six weeks is exceeded, there is no guarantee.(4) The guarantor's obligation to perform begins no earlier than 30 days from the installation of the insured part (waiting period). The guarantee extends to the unit named in the guarantee certificate from the list below. Engine up to 3 liter capacity Crankshaft, crankshaft bearings, connecting rods, connecting rod bearings, pistons, piston rings, piston pins, cylinders, camshafts, camshaft bearings, rocker arms, rocker arms, rocker arms, inlet and outlet valves, valve guides, tappets, timing chains, timing chain guide rails, timing chain tensioning rails, timing chain wheels, oil pump, bushings. Engine over 3 liters Crankshaft, crankshaft bearings, connecting rods, connecting rod bearings, pistons, piston rings, piston pins, cylinders, camshafts, camshaft bearings, rocker arms, rocker arms, rocker arms, inlet and outlet valves, valve guides, tappets, timing chains, timing chain guide rails, timing chain tensioning rails, timing chain wheels, oil pump, bushings. Automatic transmission Gears, main shaft, countershaft, auxiliary shaft, synchronizer rings, bearings, planetary gear, primary shaft, secondary shaft, torque converter, drive chain.
Manual transmission Gears, main shaft, countershaft, auxiliary shaft, synchronizer rings, bearings, planetary gear, primary shaft, secondary shaft, torque converter, drive chain. Differential Gears, main shaft, countershaft, auxiliary shaft, synchronizer rings, bearings, planetary gear, primary shaft, secondary shaft, torque converter, drive chain. Turbocharger Shaft, radial bearings, thrust bearings. A-2 What benefits and up to what amount are provided under the guarantee?
A-2.1 Reimbursement of repair costs. In justified exceptional cases - for example, if the place of residence of the guarantee holder is far away from the workshop of the guarantor or if the used vehicle has an accident or is far away from the workshop of the guarantor. Becomes defective - the warrantee can request the warrantor to carry out the repair in another vehicle master workshop agreed with INTEC in compliance with A-6.1.2 (2). Any additional repair costs are not covered by the guarantee and are to be borne by the guarantee holder.
These costs are shown in a separate invoice issued to the warrantee. Note: Over the entire term of the guarantee, repair costs will only be covered up to the amount of the daily value determined in accordance with A-2.2 of the used vehicle specified in the guarantee certificate when the last guarantee claim occurred. This means that under this guarantee, even in the case of several guarantee cases, repair costs are covered up to a maximum of the current value of the vehicle specified in the guarantee certificate at the time of the last guarantee case.
Operating materials and aids such as oils, oil filters and antifreeze are not reimbursed. (2) In addition, the following maximum reimbursement limits apply: - for the engine a maximum of 2,500 (gross), - for the gearbox a maximum of 1,500 (gross), - for the differential a maximum of 1,000 (gross) and - for the turbocharger maximum 500, - (gross). (1) For each guarantee case, the repair costs are covered in accordance with the following table of services, limited to the maximum amounts specified in A-2.2. Up to 5000 100% 70%.
Up to 10000 100% 60%. Up to 20,000 100% 50%. Up to 30,000 100% 40%.
Up to 40,000 90% 40%. Up to 50,000 80% 40%. Up to 60,000 70% 40%.
Up to 70,000 60% 40%. Over 70,000 50% 30%. Over 120,000 40% 30%.(2) Material processing costs, such as B. (3) As part of the material costs for synchronous parts in manual transmissions, only the material value will be reimbursed, as these are used to facilitate switching and not directly for the drive. The same applies to shift dogs, shift sleeves, shift linkages, balance shafts and differential locks.
A-3 For which damages are guarantees excluded? A assumption of the repair costs under the guarantee is excluded for damages (A-3.1) that. A have been caused by an accident (an event that suddenly acts on the unit with mechanical force from the outside). B were caused by direct effects of storms, rockfalls, hail, lightning, earthquakes, floods, fire or explosion.
C caused by war events of any kind, civil war, civil unrest, strike, lockout, seizure or other interference or nuclear energy. D were caused by an animal bite, water ingress or frost. F were caused by defects that already existed or existed at the start of the guarantee. Exceeding the permissible axle and trailer loads or disregarding the operating instructions e.
H have been caused by the use of the unit specified in the guarantee certificate for driving events and the associated practice drives where the achievement of a maximum speed is important (this means both legal and illegal road races); the same applies to damage associated with the aforementioned driving events and practice drives. I caused by loosened or sheared screws and rivets. J caused by oil sludge or blocked ducts, sieves or filters or by damage to cables and pipes of any kind. K are caused by overheating, local charring or melting.L caused by foreign particles on the turbocharger; or. M have been caused by damage to the gasket (excluding damage to the cylinder head gasket). Spark plugs, plugs, glow plugs, brake linings, brake discs and clutch. C clutch disc and brake linings, drums, discs and blocks, rims, tires; and. D the non-metallic inner parts of automatic transmissions as well as all types of clutch plates (also with differential locks), brake bands and control elements. The claim to the guarantee is not assignable without the prior consent of INTEC, which must be given in text form e. A-5 What is the relationship to the performance obligations of third parties? For production, manufacturing, construction and organizational faults, spare parts guarantee, etc. From the contract, also repair order e. According to these conditions, the guarantor only pays subsidiary (subordinate) benefits. If, in view of the same damage, there are also claims for performance or compensation against third parties, no repair costs will be assumed that exceed the total damage. A-6 What are the obligations of the guarantee holder in the event of a guarantee claim?
A-6.1 Obligations to notify, cooperate and reduce damage. A-6.1.1 Obligation to notify. The guarantee holder must notify INTEC of any damage in writing e.
The guarantee holder must inform INTEC immediately if the police, the public prosecutor's office or another authority investigates in connection with the damaging event. This also applies if the guarantee holder has already reported the claim to INTEC. A-6.1.2 Obligation to cooperate. (1) Every repair requires approval by INTEC. If the repair is not carried out in the guarantor's workshop, this will be commissioned by INTEC on behalf of the guarantor.(2) In the event that a repair in justified exceptional cases - see A-2.1 (1) - is not carried out in a workshop of the guarantor or in a third-party workshop designated by the guarantor, INTEC is entitled to give instructions to the guarantor, In which other master vehicle workshop the repair is to be carried out. If necessary, INTEC will contact the warrantee and inform them in text form which parts are to be sent in and kept.
The guarantor bears the costs for packaging and sending the parts if the damage is covered by the guarantee. (4) At the request of INTEC, the warrantee must allow an inspection of the used vehicle on site or a test drive with the used vehicle before the repair order is placed.
If necessary, INTEC will arrange an appointment for a viewing or test drive with the warrantee. In particular, the warrantee must. B at the request of INTEC in text form e. D at the request of INTEC, confirm in writing that only suitable operating materials and lubricants have been used for the used vehicle specified in the guarantee certificate; and. A-6.1.3 Duty to minimize damage.
The guarantee holder must ensure that the damage is avoided and reduced as far as possible in the event of damage. In doing so, the warrantee must follow instructions, insofar as this is reasonable for him, as well as instructions from INTEC - if applicable. Also verbally or by telephone - if the circumstances permit. A-6.2 Legal consequences of a breach of the information, clarification or damage mitigation obligations. However, the guarantor remains obliged to perform if the guarantor proves that the breach of one of the obligations described in A-6.1.1 to 6.1.3 neither for the occurrence or the determination of the guarantee case nor for the determination or the The scope of the guarantor's obligation to perform was the cause.This does not apply if one of the obligations described in A-6.1.1 to 6.1.3 has been maliciously breached. A-7 To what extent are damage assessment costs reimbursed?
(1) Damage determination costs, ie costs incurred by the warrantee through the determination and determination of the damage to be replaced, will only be reimbursed if INTEC has previously requested the warrantee to take these measures and a there is a covered guarantee case under these conditions. VAT per covered guarantee case. A-8 When is the guarantor exempt from any other special reasons? A-8.1 Intentional or grossly negligent causing of the damage event. In this case, INTEC will make these reductions for the guarantor.The guarantee is valid for the agreed guarantee period of 12, 24 or a maximum of 36 months from the beginning of the guarantee period. The term of the guarantee begins when the contract between the warrantee and the guarantor has come into effect, ie after a mutual agreement Signing the guarantee contract and submitting the completed installation certificate to intec , but at the earliest on the date stated in the guarantee certificate as the start of the guarantee. Under what conditions can the guarantor terminate the guarantee contract? The contract ends on the expiry date stated on the guarantee certificate (midnight). (1) Ordinary termination of the guarantee contract is excluded for both contracting parties.
(2) The guarantee contract can be extraordinarily terminated by either contracting party for good cause without observing a notice period in writing e. (3) The termination must be received by the contractual partner in writing no later than one month after becoming aware of the reason for termination.The guarantee ends with receipt of the termination. Since the guarantee contract is concluded on the guarantor's premises, there is no possibility of revocation of the guarantee contract. Part C - What other regulations must be observed? Should individual contractual conditions not be effective, the rest of them remain unaffected. German law is applicable to the guarantee contract. Any lawsuits arising from the guarantee contract must be directed against the guarantor (and not INTEC). The legal place of jurisdiction applies. Compliance with data protection regulations is very important to INTEC. In addition to processing the guarantee, INTEC also acts as an order data processor for the guarantor in this context. The following data protection information applies to the warrantee if the warrantee is in a contractual relationship with the warrantor. They contain information on how INTEC processes the personal data of the warrantee, what rights the warrantee has in this context and how the warrantee can contact INTEC in this regard. Data processing to fulfill the contractual relationship.
Company, if necessary IBAN; BIC, if necessary title. Use of data based on your consent. The provision of surname, name and address is mandatory.If the warrantee does not provide INTEC with this information, no contractual relationship can be established. All other information is voluntary. Recipients of data and data sources.
(1) Categories of recipients of data As far as legally permissible, INTEC passes on personal data to the following bodies. Lawyers in the case of active or passive litigation. IT service provider to maintain our infrastructure. (2) Data sources INTEC processes personal data that INTEC has received from the warrantee as part of the contractual relationship. Insofar as it is necessary for the fulfillment of the contractual relationship, INTEC processes personal data that INTEC legitimately obtains from publicly accessible sources, e.
Trade / association registers, press, internet or that INTEC has been authorized to transmit by other third parties. Data transfer to a third country. There are no data transfers to countries outside the European Union. You can contact the data protection officer of INTEC at: INTEC AG -Der Datenschutzbeauftragte Koenigsallee 243 37079 Göttingen.
If there are statutory retention requirements, INTEC is obliged to save the data until these deadlines have expired. For promotional messages, INTEC stores the data of the guarantee holder until the guarantee holder objects to use, the guarantee holder revokes their consent or an address is no longer permitted by law. To fulfill or process the contract, and delete them after the purpose no longer applies. The guarantor named in the guarantee application is responsible for processing the data of the guarantee holder. In other cases, INTEC AG, Königsallee 243, 37079 Göttingen is responsible unless otherwise stated.
The warrantee can request information about the personal data stored about you and their correction in the event of errors at the address given above. The warrantee can also request the restriction of processing, the portability of the data provided to us by the warrantee in a machine-readable format, or the deletion of this data - if this is no longer required. The guarantee holder has the right to object to the processing of his / her personal data for advertising purposes. The warrantee has the option of filing a complaint with the above-mentioned data protection officer or with a supervisory authority.For INTEC, the State Commissioner for Data Protection Lower Saxony, Prinzenstr. Alternatively, the warrantee can also contact the supervisory authority responsible for him / her locally. Obligation to provide data D-6. The item "Audi Q5 2016 2.0 Tdi 140KW Motor Cnha 04L100031H 61TKM 1 Year Warranty Complete" is in sale since Sunday, August 9, 2020.
This item is in the category "Vehicle Parts & Accessories\Car Parts\Engines & Engine Parts\Complete Engines". The seller is "hbsgroup" and is located in Sassnitz. This item can be shipped worldwide.